| Method | Inherited | Description |
| XYChart | (Self) | Creates a new XYChart object. |
| yAxis | (Self) | Retrieves the Axis object representing the primary y-axis of the XYChart. |
| yAxis2 | (Self) | Retrieves the Axis object representing the secondary y-axis of the XYChart. |
| syncYAxis | (Self) | Sets a linear formula to synchronize the secondary y-axis scale to the primary y-axis scale. |
| setYAxisOnRight | (Self) | Interchange the position of the primary y-axis and the secondary y-axis. |
| xAxis | (Self) | Retrieves the Axis object representing the primary x-axis of the XYChart. |
| xAxis2 | (Self) | Retrieves the Axis object representing the secondary x-axis of the XYChart. |
| setXAxisOnTop | (Self) | Interchange the position of the primary x-axis and the secondary x-axis. |
| setAxisAtOrigin | (Self) | Sets the chart into 4 quadrant mode. The axes may intersect at origin inside the plot area (as opposed to at the border of the plot area). |
| addAxis | (Self) | Adds an additional axis to the chart. |
| swapXY | (Self) | Swap the position of the x and y axes, so the x-axes will become vertical, and the y-axes will become horizontal. |
| setPlotArea | (Self) | Sets the position, size, background colors, edge color and grid colors of the plot area. |
| getPlotArea | (Self) | Gets the PlotArea object representing the plot area. |
| packPlotArea | (Self) | Adjusts the plot area size and position to fit the plot area and the axis labels in a bounding box. |
| setClipping | (Self) | Enables clipping on the plot area. |
| setTrimData | (Self) | Uses only a subset of the data series to draw charts. |
| addBarLayer | (Self) | Adds a bar layer to the XYChart, and specify the data set to use for drawing the bars. |
| addBarLayer2 | (Self) | Adds an empty bar layer to the XYChart. |
| addBarLayer3 | (Self) | Adds a multi-color bar layer to the XYChart, and specify the data set to use for drawing the bars. |
| addLineLayer | (Self) | Adds a line layer to the XYChart, and specify the data set to use for drawing the line. |
| addLineLayer2 | (Self) | Adds an empty line layer to the XYChart. |
| addSplineLayer | (Self) | Adds a spline layer to the XYChart. |
| addStepLineLayer | (Self) | Adds a step line chart layer to the XYChart. |
| addTrendLayer | (Self) | Adds a trend chart layer to the XYChart, and specify the data set to use for drawing the trend line. |
| addTrendLayer2 | (Self) | Adds a trend chart layer to the XYChart, and specify the x and y values for drawing the trend line. |
| addInterLineLayer | (Self) | Adds an inter-line layer the XYChart. An inter-line layer is used to fill the region between any two lines (straight lines, spline curves, step lines, etc). |
| addScatterLayer | (Self) | Adds a scatter chart layer to the XYChart. |
| addAreaLayer | (Self) | Adds an area chart layer to the XYChart, and specify the data set to use for drawing the area. |
| addAreaLayer2 | (Self) | Adds an empty area chart layer to the XYChart. |
| addBoxWhiskerLayer | (Self) | Adds a box-whisker layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addBoxWhiskerLayer2 | (Self) | Adds a multi-color box-whisker layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addBoxLayer | (Self) | Adds a floating box layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addVectorLayer | (Self) | Adds a vector layer to the chart. |
| addHLOCLayer | (Self) | Adds a high-low-open-close (HLOC) layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addHLOCLayer2 | (Self) | Adds an empty high-low-open-close (HLOC) layer to the XYChart. |
| addHLOCLayer3 | (Self) | Adds a multi-color high-low-open-close (HLOC) layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addCandleStickLayer | (Self) | Adds a candlestick layer to the XYChart, and specify the data sets to use for drawing the layer. |
| addContourLayer | (Self) | Adds a contour layer to the XYChart, and specify the data to use for drawing the layer. |
| addDiscreteHeatMapLayer | (Self) | Adds a discrete heat map layer to the XYChart by specifying the cell values and the cell count in the x direction. |
| addDiscreteHeatMapLayer2 | (Self) | Adds a discrete heat map layer to the XYChart by specifying the cell values and positions. |
| getLayer | (Self) | Gets a Layer object based on the order in which it is being added to the chart. |
| getLayerByZ | (Self) | Gets a Layer object based on the order in which it is being drawn. |
| getLayerCount | (Self) | Gets the number of layers in the chart. |
| layoutAxes | (Self) | Performs axis auto-scaling and sets the axis positions and lengths. |
| getXCoor | (Self) | Gets the x pixel coordinate given the x data value. |
| getYCoor | (Self) | Gets the y pixel coordinate given the y data value. |
| getXValue | (Self) | Gets the x data value given the x pixel coordinate. |
| getYValue | (Self) | Gets the y data value given the y pixel coordinate. |
| getNearestXValue | (Self) | Gets the x data value that is nearest to the specified x pixel coordinate. |
| xZoneColor | (Self) | Creates an x-zone color. An x-zone color will change from one color to another depending on a threshold value on the x-axis. |
| yZoneColor | (Self) | Creates a y-zone color. A y-zone color will change from one color to another depending on a threshold value on the y-axis. |
| xScaleColor | (Self) | Creates an x-scale color. An x-scale is a color that will vary depending on the x value of the pixel. |
| yScaleColor | (Self) | Creates a y-scale color. An y-scale is a color that will vary depending on the y value of the pixel. |
| setSize | BaseChart | Sets the size of the chart, exclusive of the drop shadow (if any). |
| getWidth | BaseChart | Gets the width of the chart. |
| getHeight | BaseChart | Gets the height of the chart. |
| getAbsOffsetX | BaseChart | Gets the x offset of the chart relative to the outermost MultiChart container. |
| getAbsOffsetY | BaseChart | Gets the y offset of the chart relative to the outermost MultiChart container. |
| setBackground | BaseChart | Sets the background color, border color and 3D border effect of the chart. |
| setRoundedFrame | BaseChart | Sets the border style of the chart to rounded corners. |
| setThickFrame | BaseChart | Sets a thick frame around the chart. |
| setDropShadow | BaseChart | Adds a drop shadow to the chart. |
| setBorder | BaseChart | Sets the border color of the chart. |
| setWallpaper | BaseChart | Uses the image from the specified file or resource as the wallpaper to fill the background of the chart. |
| setBgImage | BaseChart | Uses the image from the specified file or resource as the background image of the chart. |
| setSearchPath | BaseChart | Sets the search path for loading image files. |
| setResource | BaseChart | Assigns a resource ID to a DrawArea object to allow it to be referenced using a resource path. |
| setTransparentColor | BaseChart | Specifies a certain color to mean transparent when creating a raster image output. |
| setAntiAlias | BaseChart | Controls whether anti-alias is used when drawing lines, shapes and text. |
| addTitle | BaseChart | Adds a title at the top center of the chart. |
| addTitle2 | BaseChart | Adds a title to the chart. |
| addLegend | BaseChart | Adds a legend box to the chart. |
| addLegend2 | BaseChart | Adds a legend box to the chart with grid layout. |
| getLegend | BaseChart | Gets the LegendBox object representing the legend box in the chart. |
| layoutLegend | BaseChart | Lays out and gets the LegendBox object representing the legend box in the chart. |
| getDrawArea | BaseChart | Retrieves the internal DrawArea object that is used to draw the chart. |
| addText | BaseChart | Adds a text box to the chart. |
| addTable | BaseChart | Adds a CDML table to the chart. |
| addLine | BaseChart | Adds a line to the chart. |
| addExtraField | BaseChart | Adds an array of text to be used as an extra field in various places. |
| addExtraField2 | BaseChart | Adds an array of numbers/dates to be used as an extra field in various places. |
| setColor | BaseChart | Change the color at the specified position in the palette. |
| setColors | BaseChart | Change the colors in the palette. |
| setColors2 | BaseChart | Change the colors in the palette, starting from the specified position in the palette. |
| getColor | BaseChart | Gets the color at the specified position of the palette. |
| adjustBrightness | BaseChart | Creates a color that is a darkened or brightened version of the given color. |
| halfColor | BaseChart | Creates a color that is half the intensity of the given color. |
| dashLineColor | BaseChart | Creates a dash line color. |
| patternColor | BaseChart | Creates a pattern color using an array of colors as the bitmap pattern. |
| patternColor2 | BaseChart | Creates a pattern color by using the image from the specified file or resource as the pattern. |
| linearGradientColor | BaseChart | Creates a two-point linear gradient color. |
| linearGradientColor2 | BaseChart | Creates a multi-point linear gradient color. |
| radialGradientColor | BaseChart | Creates a two-point radial gradient color. |
| radialGradientColor2 | BaseChart | Creates a multi-point radial gradient color. |
| gradientColor | BaseChart | Creates a two-point linear gradient color. |
| gradientColor2 | BaseChart | Creates a multi-point linear gradient color. |
| setDefaultFonts | BaseChart | Sets the defaults for normal, bold, italic and bold-italic fonts. |
| setFontTable | BaseChart | Sets an entry in the font table to the specified font name. |
| formatValue | BaseChart | Formats a number/date using the ChartDirector formatting syntax as is in Parameter Substitution and Formatting. |
| setNumberFormat | BaseChart | Sets the characters used for thousand separator, decimal point, and negative sign. |
| setMonthNames | BaseChart | Sets the names of the months for date/time formatting purposes. |
| setWeekDayNames | BaseChart | Sets the names of the week days for date/time formatting purposes. |
| setAMPM | BaseChart | Sets the names to be used to denote morning and afternoon. |
| layout | BaseChart | Perform auto-scaling of the axes (if any) and compute the positions of the various objects in the chart. |
| enableVectorOutput | BaseChart | This method is deprecated. It has no effect and may be removed in future versions of ChartDirector. |
| setOutputOptions | BaseChart | Sets output format options for the next chart output. |
| makeChart | BaseChart | Generates the chart image and save it into a file. |
| makeChart2 | BaseChart | Generates the chart as an image in memory. |
| makeChart3 | BaseChart | Generates the chart in internal format and return a DrawArea object to allow adding custom drawings on top of the chart. |
| makeTmpFile | BaseChart | Generates the chart as an image and save it to a temporary file, and automatically remove old files. |
| initDynamicLayer | BaseChart | Initializes a dynamic layer for drawing text and shapes. |
| removeDynamicLayer | BaseChart | Removes the dynamic layer if any. |
| getHTMLImageMap | BaseChart | Generates an HTML image map to define hot spots and tooltips for the chart. |