Bars with Marks

This example demonstrates combine a bar layer with a box-whisker layer to create bars with marks. It also demonstrates gradient background color, rounded frame, soft drop shadow, and automatic resizing of the plot area to fit the chart.

The gradient background is achieved by using BaseChart.linearGradientColor to define the gradient color, then use BaseChart.setBackground to set it as the chart background color.
The rounded frame is configured using BaseChart.setRoundedFrame.
The soft drop shadow is configured using BaseChart.setDropShadow.
The box-whisker layer is created using XYChart.addBoxWhiskerLayer. Only the middle data set is used, so the box- whisker symbol appears as a mark line. BaseBoxLayer.setDataGap is used to reduce the horizontal gap between the box- whisker symbols, so as to make the mark lines wider than the bars.
The bar layer is created using XYChart.addBarLayer.
The soft lighting effect of the bars is defined using softLighting, then applied to the bars using Layer.setBorderColor.
After the entire chart is configured, the XYChart.packPlotArea method is used to adjust the plot area size, so as to fit the plot area and the axes in a given bounding box.

[File: phpdemo/markbar.php]

<?php
require_once("../lib/phpchartdir.php");

# The data for the bars and the marks
$barData = array(100, 125, 245, 147, 67, 96, 160, 145, 97, 167, 220, 125);
$markData = array(85, 156, 220, 120, 80, 110, 140, 130, 111, 180, 175, 100);

# The labels for the bar chart
$labels = array("Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sept", "Oct", "Nov", "Dec")
    ;

# Create a XYChart object of size 480 x 360 pixels. Use a vertical gradient color from pale blue
# (e8f0f8) to sky blue (aaccff) spanning half the chart height as background. Set border to blue
# (88aaee). Use rounded corners. Enable soft drop shadow.
$c = new XYChart(480, 360);
$c->setBackground($c->linearGradientColor(0, 0, 0, $c->getHeight() / 2, 0xe8f0f8, 0xaaccff),
    0x88aaee);
$c->setRoundedFrame();
$c->setDropShadow();

# Add a title to the chart using 15 points Arial Italic font. Set top/bottom margins to 12 pixels.
$title = $c->addTitle("Bars with Marks Demonstration", "Arial Italic", 15);
$title->setMargin2(0, 0, 12, 12);

# Tentatively set the plotarea to 50 pixels from the left edge to allow for the y-axis, and to just
# under the title. Set the width to 65 pixels less than the chart width, and the height to reserve
# 90 pixels at the bottom for the x-axis and the legend box. Use pale blue (e8f0f8) background,
# transparent border, and grey (888888) dotted horizontal grid lines.
$c->setPlotArea(50, $title->getHeight(), $c->getWidth() - 65, $c->getHeight() - $title->getHeight()
     - 90, 0xe8f0f8, -1, Transparent, $c->dashLineColor(0x888888, DotLine));

# Add a legend box where the bottom-center is anchored to the 15 pixels above the bottom-center of
# the chart. Use horizontal layout and 8 points Arial font.
$legendBox = $c->addLegend($c->getWidth() / 2, $c->getHeight() - 15, false, "Arial", 8);
$legendBox->setAlignment(BottomCenter);

# Set the legend box background and border to pale blue (e8f0f8) and bluish grey (445566)
$legendBox->setBackground(0xe8f0f8, 0x445566);

# Use rounded corners of 5 pixel radius for the legend box
$legendBox->setRoundedCorners(5);

# Use line style legend key
$legendBox->setLineStyleKey();

# Set axes to transparent
$c->xAxis->setColors(Transparent);
$c->yAxis->setColors(Transparent);

# Set the labels on the x axis
$c->xAxis->setLabels($labels);

# Add a box-whisker layer with just the middle mark visible for the marks. Use red (ff0000) color
# for the mark, with a line width of 2 pixels and 10% horizontal gap
$markLayer = $c->addBoxWhiskerLayer(null, null, null, null, $markData, -1, 0xff0000);
$markLayer->setLineWidth(2);
$markLayer->setDataGap(0.1);

# Add the legend key for the mark line
$legendBox->addKey("Target", 0xff0000, 2);

# Tool tip for the mark layer
$markLayer->setHTMLImageMap("", "", "title='Target at {xLabel}: {med}'");

# Add a blue (0066cc) bar layer using the given data.
$barLayer = $c->addBarLayer($barData, 0x0066cc, "Actual");

# Use soft lighting effect for the bars with light direction from left.
$barLayer->setBorderColor(Transparent, softLighting(Left));

# Tool tip for the bar layer
$barLayer->setHTMLImageMap("", "", "title='{dataSetName} at {xLabel}: {value}'");

# Adjust the plot area size, such that the bounding box (inclusive of axes) is 10 pixels from the
# left edge, just below the title, 15 pixels from the right edge, and 10 pixels above the legend
# box.
$c->packPlotArea(10, $title->getHeight(), $c->getWidth() - 15, $c->layoutLegend()->getTopY() - 10);

# Output the chart
$viewer = new WebChartViewer("chart1");
$viewer->setChart($c, SVG);

# Include tool tip for the chart
$viewer->setImageMap($c->getHTMLImageMap(""));
?>

<!DOCTYPE html>
<html>
<head>
    <title>Bars with Marks</title>
    <!-- Include ChartDirector Javascript Library to support chart interactions -->
    <script type="text/javascript" src="cdjcv.js"></script>
</head>
<body style="margin:5px 0px 0px 5px">
    <div style="font:bold 18pt verdana;">
        Bars with Marks
    </div>
    <hr style="border:solid 1px #000080; background:#000080" />
    <div style="font:10pt verdana; margin-bottom:1.5em">
        <a href="viewsource.php?file=<?=basename(__FILE__)?>">View Chart Source Code</a>
    </div>
    <!-- ****** Here is the chart image ****** -->
    <?php echo $viewer->renderHTML(); ?>
</body>
</html>