[File: phpdemo/binaryseries.php]
<?php
require_once("../lib/phpchartdir.php");
# The data for the chart
$dataY = array(1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 1);
$dataX = array(chartTime(2008, 7, 1, 0, 0, 0), chartTime(2008, 7, 1, 2, 17, 2), chartTime(2008, 7,
1, 8, 5, 30), chartTime(2008, 7, 1, 10, 54, 10), chartTime(2008, 7, 1, 15, 40, 0), chartTime(
2008, 7, 1, 18, 22, 20), chartTime(2008, 7, 1, 22, 17, 14), chartTime(2008, 7, 2, 2, 55, 50),
chartTime(2008, 7, 2, 8, 17, 14), chartTime(2008, 7, 2, 11, 55, 50), chartTime(2008, 7, 2, 13,
17, 14), chartTime(2008, 7, 2, 17, 55, 50), chartTime(2008, 7, 2, 20, 17, 14), chartTime(2008,
7, 3, 0, 0, 0));
# In this example, we only use position 1, 3, 5 for the data series. Positions 0, 2, 4, 6 are empty
# and serve as gaps.
$labels = array("", "ON Only Filling", "",
"<*font,color=cc2200*>ON<*/font*> / <*font,color=00aa22*>OFF<*/font*> Filling", "",
"Logic Line", "");
# Create a XYChart object of size 600 x 180 pixels
$c = new XYChart(600, 180);
# Add a title to the chart using 10 points Arial Bold font. Set top/bottom margins to 12 pixels.
$title = $c->addTitle("Binary Data Series Demonstration", "Arial Bold", 10);
# Tentatively set the plotarea at (100, 30) and of size 470 x 120 pixels. Use transparent border.
# Use grey (888888) solid line and light grey (ccccc) dotted line as major and minor vertical grid
# lines.
$c->setPlotArea(100, 30, 470, 120, -1, -1, Transparent)->setGridColor(Transparent, 0x888888,
Transparent, $c->dashLineColor(0xcccccc, DotLine));
# Set axes to transparent
$c->xAxis->setColors(Transparent);
$c->yAxis->setColors(Transparent);
# Set the y axis labels
$c->yAxis->setLabels($labels);
# Set y-axis label style to 8pt Arial Bold
$c->yAxis->setLabelStyle("Arial Bold", 8);
# Set x-axis major and minor tick density to 50 and 5 pixels. ChartDirector auto-scaling will use
# this as the guideline when putting ticks on the x-axis.
$c->xAxis->setTickDensity(50, 5);
# Use "<*font=Arial Bold*>{value|mmm dd}" for the first label of an hour, and "{value|hh:nn}" for
# all other labels.
$c->xAxis->setMultiFormat(StartOfDayFilter(), "<*font=Arial Bold*>{value|mmm dd}", AllPassFilter(),
"{value|hh:nn}");
#
# A Logic Line can be achieved using a StepLineLayer in ChartDirector
#
# Shift the data by 4.5, so instead of 0 - 1, it is now 4.5 to 5.5, or fluctuate around the y = 5
# (Logic Line label) position.
$shiftedLine0 = (new ArrayMath($dataY))->add(4.5)->result();
# Add step lines using the original and the reversed data
$layer0 = $c->addStepLineLayer($shiftedLine0, 0x0000ff);
$layer0->setXData($dataX);
#
# To perform ON/OFF filling, we draw the logic line, and its reverse, and fill the region in between
#
# Shift the data by 2.5, so instead of 0 - 1, it is now 2.5 to 3.5, or fluctuate around the y = 3
# (ON/OFF Filing label) position.
$shiftedLine1 = (new ArrayMath($dataY))->add(2.5)->result();
# Reverse the data, so the 0 becomes 1 and 1 becomes 0, and shift it as well.
$reverseShiftedLine1 = (new ArrayMath($dataY))->mul(-1)->add(3.5)->result();
# Add step lines using the original and the reversed data
$layer1 = $c->addStepLineLayer($shiftedLine1, Transparent);
$layer1->addDataSet($reverseShiftedLine1, Transparent);
$layer1->setXData($dataX);
# Fill the region between the two step lines with green (00aa22) or red (cc2200), depending on
# whether the original or the reserve is higher.
$c->addInterLineLayer($layer1->getLine(0), $layer1->getLine(1), 0x00aa22, 0xcc2200);
#
# The ON Only filling is the same as ON/OFF filling, except the OFF filling color is transparent
#
# Shift the data by 0.5, so instead of 0 - 1, it is now 0.5 to 1.5, or fluctuate around the y = 1
# (ON Only Filing label) position.
$shiftedLine2 = (new ArrayMath($dataY))->add(0.5)->result();
# Reverse the data, so the 0 becomes 1 and 1 becomes 0, and shift it as well.
$reverseShiftedLine2 = (new ArrayMath($dataY))->mul(-1)->add(1.5)->result();
# Add step lines using the original and the reversed data
$layer2 = $c->addStepLineLayer($shiftedLine2, Transparent);
$layer2->addDataSet($reverseShiftedLine2, Transparent);
$layer2->setXData($dataX);
# Fill the region between the two step lines with green (00aa22) or transparent, depending on
# whether the original or the reserve is higher.
$c->addInterLineLayer($layer2->getLine(0), $layer2->getLine(1), 0x00aa22, Transparent);
# Adjust the plot area size, such that the bounding box (inclusive of axes) is 10 pixels from the
# left edge, 10 pixels below the title, 30 pixels from the right edge, and 10 pixels above the
# bottom edge.
$c->packPlotArea(10, $title->getHeight() + 10, $c->getWidth() - 30, $c->getHeight() - 10);
# Output the chart
$viewer = new WebChartViewer("chart1");
$viewer->setChart($c, SVG);
?>
<!DOCTYPE html>
<html>
<head>
<title>Binary Data Series</title>
<!-- Include ChartDirector Javascript Library to support chart interactions -->
<script type="text/javascript" src="cdjcv.js"></script>
</head>
<body style="margin:5px 0px 0px 5px">
<div style="font:bold 18pt verdana;">
Binary Data Series
</div>
<hr style="border:solid 1px #000080; background:#000080" />
<div style="font:10pt verdana; margin-bottom:1.5em">
<a href="viewsource.php?file=<?=basename(__FILE__)?>">View Chart Source Code</a>
</div>
<!-- ****** Here is the chart image ****** -->
<?php echo $viewer->renderHTML(); ?>
</body>
</html>
© 2022 Advanced Software Engineering Limited. All rights reserved.